• T Handle Universal Socket 10mm Nut Grip Length 600 x 200mm Front View
  • T Handle Universal Socket 10mm Nut Grip Length 600 x 200mm mechanical drawing
1 2

T Handle Universal Socket 10mm Nut Grip Length 600 x 200mm

$107
Sale Sold out

SKU: 124M.600-10(2B)

Shipping calculated at checkout.

Status : In Stock
Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    T Handle Universal Socket 10mm Nut Grip Length 600 x 200mm Front View

    T Handle Universal Socket 10mm Nut Grip Length 600 x 200mm
    Hold Nuts & Bolts Without Magnets, Even at Full Reach

    Hold Nuts & Bolts Without Magnets, Even at Full Reach

    Ko-ken’s NUT GRIP design holds non-magnetic nuts/bolts inside a 6-point socket using two ball bearings and a spring steel ring—so you can start fasteners one-handed without fighting gravity. This T-handle universal (ball joint) setup gives you reach and angle access for hard-to-reach 10mm fasteners, with a long 600mm shaft and 200mm cross-handle for control.

    Specs

    Spec

    Detail

    Output Size

    10mm

    Socket Type

    6-point Nut Grip with Ball Joint (universal)

    Overall Length (L1)

    600mm

    Handle Width (L2)

    200mm

    D Size

    14.5mm

    H Size

    6mm

    What It’s For

    • Starting 10mm nuts/bolts in deep or awkward spots where fingers and magnets fail
    • Holding the fastener in the socket while you guide it into place (non-magnetic hardware)
    • Reaching around obstacles with the ball joint while keeping steady control from the T-handle

    How Nut Grip Works

    Two ball bearings ride on opposing flats and are pushed by a coil spring system. When the nut/bolt is inserted, the balls press inward and hold it firmly—no magnets required.

    How to Use (3 Steps)

    1. Push the nut/bolt into the socket until it seats and “grips.”
    2. Guide the fastener into position using the long shaft and ball joint angle as needed.
    3. Start threading by hand feel, then switch to your preferred tightening method once it’s started.

    In the Box

    • T-Handle Universal Nut Grip Socket, 10mm (L1 600mm x L2 200mm)

    Safety Notes

    • Keep the socket fully seated before applying force.
    • California Proposition 65 warning applies to this product

    Video Demo