• Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) Front View
  • Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) mechanical drawing
  • Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) Close View
  • Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) Front View
  • Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) Front View
  • Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) Multiple Views
1 6

Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth)

$156
Sale Sold out

SKU: NBR390AF

Shipping calculated at checkout.

Status : In Stock
Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth) Front View

    Nepros 3/8" Drive Flex-Head Ratchet Handle (90-Tooth)
    Compact Flex-Head Ratchet for Tight Access (4° Swing)

    Compact Flex-Head Ratchet for Tight Access (4° Swing)

    When you don’t have room to swing a standard ratchet, the NBR390AF gets it done with a compact head and a 90-tooth mechanism for a tight 4° working angle. The flex head helps you “break” awkward angles around frames, brackets, lines, and covers while keeping the handle where your hands can actually pull.

    Specs

    Spec

    Detail

    Drive Size

    3/8" square drive

    Head Style

    Flex-head (pivoting head)

    Gear Teeth

    90-tooth

    Gear / Working Angle

    4°

    Head Width (B)

    26 mm

    Head Size (E)

    20 mm

    Head Thickness (T)

    14 mm

    Overall Length (L)

    225 mm

    Weight

    320 g

    Barcode

    4989433616025

    Why 90-Tooth Matters

    • 4° swing arc helps when you’re trapped between castings, guards, hoses, and brackets

    • Faster ratcheting in tight quarters (less repositioning)

    • Great for “tight-but-not-impact” fasteners where control matters

    Where This Ratchet Shines

    • Hose clamps, brackets, and small hardware tucked behind lines

    • Engine bay and cab/under-dash fasteners with limited handle swing

    • Service panels and covers where the head angle needs to change without moving the socket off the fastener

    How to Use (3 Steps)

    1. Seat the socket fully on the fastener.
    2. Set the head angle so the handle clears obstructions.
    3. Ratchet with short strokes; re-angle the head as needed to keep the socket engaged.

    In the Box

    1x nepros NBR390AF 3/8" Drive Flex-Head Ratchet Handle (90-Tooth)

    Notes for Best Results

    • Use smooth, steady force to avoid rounding fasteners in tight access.

    • Keep the socket fully seated before pulling—especially when the head is angled.

    • Pair with shallow sockets for the lowest overall stack height when clearance is critical.