• Ko-ken T Handle Universal Socket 10mm (6-Point) — 800 x 190mm Front View
  • Ko-ken T Handle Universal Socket 10mm (6-Point) — 800 x 190mm mechanical drawing
1 2

Ko-ken T Handle Universal Socket 10mm (6-Point) — 800 x 190mm

$120
Sale Sold out

SKU: 3116M-10

Shipping calculated at checkout.

Status : In Stock
Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    Ko-ken T Handle Universal Socket 10mm (6-Point) — 800 x 190mm Front View

    Ko-ken T Handle Universal Socket 10mm (6-Point) — 800 x 190mm
    Reach Deep Fasteners With a Super-Long T-Handle 10mm Socket

    Reach Deep Fasteners With a Super-Long T-Handle 10mm Socket

    This super-long 10mm T-handle socket is built for recessed or obstructed fasteners where a ratchet, extension stack, or wrench won’t reach cleanly. The 6-point socket profile gives solid engagement on the flats to help reduce rounding, while the long shaft delivers access down into frames, housings, brackets, and tight service cavities. Ideal for quick hand-driven run-downs and controlled torque in awkward locations.

    Specs

    Spec

    Detail

    Output Size

    10mm

    Socket Type

    Universal 6 Point Socket

    Overall Length (L1)

    800mm

    Cross Bar Length (L2)

    190mm

    D Size

    14.5mm

    H Size

    8mm

    Where This Tool Helps Most

    • Deep recessed 10mm fasteners (covers, brackets, clamps, guards) where you need reach more than speed
    • Tight service windows where a ratchet head and extension stack won’t fit or keeps popping off-angle
    • Quick hand-turning after “breaking loose” with another tool (great for running hardware in/out without swapping setups)

    Why 6-Point + T-Handle Is a Solid Combo

    • 6-point contact helps load the flats more than the corners for better grip on typical 10mm hardware
    • T-handle gives two-handed control and steadier alignment on long-reach fasteners
    • Long shaft keeps your hands out of the work area (better clearance around sharp edges and hot components)

    How to Use (3 Steps)

    1. Seat the 10mm socket fully on the fastener (keep it straight before applying force).
    2. Apply smooth, even pressure on the cross bar to start movement.
    3. Once free, continue turning by hand for speed and control.

    In the Box

    • 1x Ko-ken T Handle Universal Socket, 10mm, 6-point, 800 x 190mm (SKU: 3116M-10)

    Safety Notes

    • Use steady pressure—avoid sudden jerks on long tools to reduce slip risk.
    • If the fastener is seized, break it loose with an appropriate tool first, then use the T-handle for controlled turning.
    • California Proposition 65 warning applies to this product listing.