• Ko-ken 3/8” Sq. Dr. 4 Pc NUT GRIP TORX Socket Set (E10–E20) Front View
1 1

Ko-ken 3/8” Sq. Dr. 4 Pc NUT GRIP TORX Socket Set (E10–E20)

$73
Sale Sold out

SKU: RS3425/4-2B

Shipping calculated at checkout.

Status : In Stock
Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    Ko-ken 3/8” Sq. Dr. 4 Pc NUT GRIP TORX Socket Set (E10–E20) Front View

    Ko-ken 3/8” Sq. Dr. 4 Pc NUT GRIP TORX Socket Set (E10–E20)
    Keep E-Torx Fasteners From Falling Off the Socket

    Keep E-Torx Fasteners From Falling Off the Socket

    Ko-ken’s NUT GRIP TORX sockets are built for those moments when you can’t afford a nut/bolt dropping into a skid plate or engine bay. The internal coil-spring + ball-bearing design holds the fastener securely without magnets, helping you start and run hardware with less slipping. This 4-piece E-Torx set stays organized on a 150mm rail so the sizes you actually use are always together.

    Specs

    Spec

    Detail

    UPC

    4991644218530

    Brand

    Ko-ken

    Drive Size

    3/8” square drive

    Drive Shape

    Square

    Type

    NUT GRIP E-Torx (External TORX) socket set on rail

    Output Sizes (E-Torx)

    E10, E12, E14, E20

    Rail Length

    150mm

    Includes

    4 sockets + rail

    Holding Mechanism

    Coil spring + ball bearings (non-magnetic fastener retention)

    What This Tool Is For

    • External Torx (E-Torx) fasteners where you need the nut/bolt held in the socket during removal/installation (E10–E20)
    • Working over open cavities (skid plates, frames, engine bays) where dropping hardware wastes time

    • Faster, cleaner starts on threads because the fastener stays seated without magnets

    Key Features That Matter

    • NUT GRIP retention (coil spring + ball bearings) holds nuts/bolts without magnets
    • Helps transfer torque efficiently and reduces slippage on TORX fasteners
    • 150mm rail keeps the set organized and easy to grab
    • 3/8” drive coverage of the common E-sizes: E10, E12, E14, E20

    How to Use (Quick Steps)

    1. Select the correct E-Torx size (E10, E12, E14, or E20)
    2. Push the socket onto the fastener until you feel it “grab” (retention engages).
    3. Turn steadily to remove or install; keep the socket square to the fastener to avoid cam-out.

    In the Box

    • 4x Ko-ken 3/8” drive NUT GRIP E-Torx sockets: E10, E12, E14, E20
    • 1x 150mm socket rail

    Safety Notes

    • Wear approved eye protection.

    • Keep the socket fully seated and square on the fastener to reduce slip risk.

    • California Proposition 65: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.