• Ko-ken 3/8” Nut Grip SAE Socket Set (9 Piece) Front and Top View
  • Ko-ken 3/8” Nut Grip SAE Socket Set (9 Piece) Front View
1 2

Ko-ken 3/8” Nut Grip SAE Socket Set (9 Piece)

$185
Sale Sold out

SKU: RS3450A/9

Shipping calculated at checkout.

Status : In Stock
Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    Ko-ken 3/8” Nut Grip SAE Socket Set (9 Piece) Front and Top View

    Ko-ken 3/8” Nut Grip SAE Socket Set (9 Piece)
    Hold Nuts & Bolts Without Magnets (No More Dropping Fasteners)

    Hold Nuts & Bolts Without Magnets (No More Dropping Fasteners)

    Ko-ken NUT GRIP sockets are made for situations where you can’t afford to drop hardware—overhead work, tight bays, and anywhere a magnet isn’t ideal. Each socket uses a spring steel ring and opposing ball bearings that clamp the nut/bolt on the flats, so the fastener stays put as you guide it in or back out. This is a chrome hand-socket set on a 200mm rail, covering common SAE sizes in a compact, organized layout.

    Specs

    Spec

    Detail

    Brand

    Ko-ken

    Drive Size

    3/8” Square Drive

    Measurement System

    SAE

    Socket Type

    NUT GRIP (non-magnetic retention)

    Point Style

    6-point

    Finish

    Chrome

    Set Pieces

    9

    Sizes Included

    1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4

    Storage

    Socket rail

    Rail Length

    200 mm

    Country of Origin

    Not specified

    What This Tool Is For

    • Holding nuts/bolts securely in the socket without magnets (great for stainless, sensitive electronics areas, or when magnets are a no-go)

    • Overhead and hard-to-reach fasteners where dropping hardware wastes time

    • Starting nuts/bolts by hand with better control before final tightening

    Key Features That Matter

    • Non-magnetic retention: spring steel ring + ball bearings grip the fastener on opposing flats

    • Helps prevent dropped nuts/bolts during install and removal

    • 6-point design for strong contact on flats (better load distribution than 12-point in many situations)

    • Organized on a 200mm rail for fast size changes and easy drawer storage

    How to Use (Quick Steps)

    1. Push the nut/bolt into the socket until you feel the retention engage.
    2. Guide the fastener into position by hand (especially helpful when starting threads).
    3. Run it down with your ratchet, then torque to spec with the correct tool.

    In the Box

    • 9x Ko-ken 3/8” Drive SAE NUT GRIP sockets: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4

    • 1x Socket rail (200 mm)

    Safety Notes

    • Always start fasteners by hand to avoid cross-threading.

    • Don’t use chrome hand sockets with impact tools.

    • Wear approved eye protection when working overhead or around rotating equipment.