• Ko-ken 3/8" Dr NUT GRIP Socket Set 8–19mm (11 Pc) Front View
1 1

Ko-ken 3/8" Dr NUT GRIP Socket Set 8–19mm (11 Pc)

$148
Sale Sold out

SKU: RS3450M/11

Shipping calculated at checkout.

Status : In Stock
Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    Ko-ken 3/8" Dr NUT GRIP Socket Set 8–19mm (11 Pc) Front View

    Ko-ken 3/8" Dr NUT GRIP Socket Set 8–19mm (11 Pc)
    Hold Nuts & Bolts Without Magnets (No More Dropouts)

    Hold Nuts & Bolts Without Magnets (No More Dropouts)

    Ko-ken’s NUT GRIP sockets are built to keep nuts and bolts seated in the socket without using a magnet. A spring-and-ball retention design grips the fastener on opposing flats so you can guide hardware into tight spots, start threads with less fumbling, and pull fasteners back out without them falling off. Standard-length chrome hand sockets on a 250mm rail makes this a clean, grab-and-go 3/8" drive set.

    Specs

    Spec

    Detail

    Brand

    Ko-ken

    Drive Size

    3/8"

    System

    Metric

    Socket Style

    Nut Grip (non-magnetic retention)

    Socket Points

    6-point

    Length

    Standard

    Set Type

    11-piece socket set on rail

    Sizes Included

    8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

    Rail Length

    250mm

    What This Tool Is For

    • Starting nuts/bolts in tight areas where dropping hardware wastes time

    • Non-magnetic fastener holding when you don’t want magnet pickup or debris issues
    • General 3/8" drive hand-socket work across 8–19mm sizes (shop, automotive, equipment service)

    Key Features That Matter

    • Non-magnetic fastener retention (holds nuts/bolts without magnets)

    • Ball-and-spring design grips the fastener on opposing flats for a secure hold
    • Standard-length 6-point chrome sockets for everyday hand use

    • Comes organized on a 250mm rail for quick size selection and storage

    In the Box

    • 11x Ko-ken 3450M Nut Grip sockets: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

    • 1x 250mm socket rail

    How to Use (Quick Steps)

    1. Push the nut/bolt into the socket until you feel it seat and hold.
    2. Guide the fastener into position and start threads by hand where possible.
    3. Turn with your 3/8" drive ratchet/handle; pull the fastener back out still retained in the socket.

    Safety Notes

    • Hand-socket set (not impact-rated unless you confirm your specific application requires impact sockets).

    • Keep the socket fully seated to avoid rounding fasteners.

    • Wear approved eye protection when working overhead or in tight bays.