Skip to product information
1 of 1

Ko-ken 1/4" Sq. Drive SAE Universal 12-Point NUT GRIP Socket Set (10 pc)

Sale price
$420
Regular price
Sale Sold out

SKU: SKU:RS2446A/10

Shipping calculated at checkout.

Status : In Stock

Save

    Guaranteed Secure Checkout

    Easy Online Returns

    Return this item within 90 days of purchase. Read Return Policy

    View full details
    Ko-ken 1/4" Sq. Drive SAE Universal 12-Point NUT GRIP Socket Set (10 pc) Front View

    Ko-ken 1/4" Sq. Drive SAE Universal 12-Point NUT GRIP Socket Set (10 pc)

    Hold Nuts Securely, Even When You Can’t Use a Magnet

    Hold Nuts Securely, Even When You Can’t Use a Magnet

    Ko-ken’s NUT GRIP design is made to hold non-magnetic nuts/bolts firmly inside the socket so you can start fasteners cleanly and work confidently in tight spots. This 12-point “Universal” style uses three ball retainers held by a spring steel ring, helping you keep control when the hardware wants to fall away mid-install.

    Specs

    Spec

    Detail

    Brand

    Ko-ken

    Drive Size

    1/4"

    System

    SAE

    Point / Profile

    12-point

    Socket Type

    Universal

    Retention System

    NUT GRIP (three balls retained by a spring steel ring)


    Set Size

    10 pieces


    Sizes Included

    7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8

    Included Part Numbers

    2446A-7/32, 2446A-1/4, 2446A-9/32, 2446A-5/16, 2446A-11/32, 2446A-3/8, 2446A-7/16, 2446A-1/2, 2446A-9/16, 2446A-5/8

    What This Tool Is For

    • Starting and holding non-magnetic nuts/bolts (stainless, some coated hardware) where a magnet won’t help

    • Tight access work where you need the socket to keep the fastener captured while you position the tool

    • General service work needing a 12-point SAE set in a compact 1/4" drive range (7/32–5/8)

    Key Features That Matter

    • NUT GRIP retention holds nuts/bolts without magnets (better control, less dropping hardware)

    • 12-point design uses three ball retainers with a spring steel ring for secure holding

    • Universal style helps in awkward angles while keeping the fastener controlled

    How to Use (Quick Steps)

    1. Push the socket fully onto the nut/bolt so the retention balls engage.
    2. Position the fastener where it needs to go, then start threading by hand feel (don’t cross-thread).
    3. Once started, run it down normally and remove the socket—hardware should stay controlled during placement.

    In the Box

    • 1x Ko-ken 1/4" Sq. Drive SAE Universal 12-Point NUT GRIP Socket Set (RS2446A/10)

    • 10x sockets: 2446A-7/32, 2446A-1/4, 2446A-9/32, 2446A-5/16, 2446A-11/32, 2446A-3/8, 2446A-7/16, 2446A-1/2, 2446A-9/16, 2446A-5/8

    Safety Notes

    • California Proposition 65: WARNING—This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

    • Always wear approved eye protection.

    • If a fastener feels cross-threaded, stop and reset before applying torque.